Automatic steel bar lattice truss welding production machine 12 m / min
The automatic steel truss welding production line (wave peak 190-210 adjustable) provides steel truss production line special equipment, welding machine is mainly processing truss welding.
Technical Parameters:
| No. | Item | Specification |
| 1 | Rated power | 3*250KW |
| 2 | Power source | 380V 50Hz |
| 3 | Phase number | 3phase 4cable |
| 4 | Duty cycle | 20% |
| 5 | Air pressure | 0.6-0.8MPa |
| 6 | Coolant flow | >150L/min |
| 7 | Coolant temperature | ≤30℃ |
| 8 | Dimension | 39.4m*4.4m*3.3m |
| 9 | Oil pressure | 7-11MPa |
| 10 | Height of gider | Straight foot 70-350mm folding foot 70-330mm |
| 11 | Section spacing | 190-210mm adjustable |
| 12 | Assist bar diameter | 4-8mm |
| 13 | Upper bar diameter | 6-14mm |
| 14 | Max.speed | 12 m/min adjustable with height |
| 15 | Lower bar diameter | 6-14mm |
Product features:
1 . Wide production and use range of equipment: high and low range value of truss
2 . Convenient production and adjustment: the main engine of the steel truss welding line adopts an integral frame, which is electrically adjusted up and down to meet the needs of steel truss welding of different heights.
3 . The overall production line is compact in structure, small in area and beautiful in appearance.
A. No power consumption in the straightening part, which is pulled and straightened by the oil cylinder;B. In the whole machine work, except three transformer welding and hydraulic station motor, other parts do not consume electricity.
4 . The interval between wave peaks of steel trusses is adjustable from 190-210mm, without the need for secondary manual shearing.
5 . general steel welding without oxidation degree treatment (can adapt to cold rolling and hot rolling steel welding)
6 . Application scope of this equipment: steel truss floor bearing plate, PC precast concrete component, railway sleeper and other industries.
The components of the steel truss welding line:
1 . Feeding mechanism 2 . Straightening mechanism 3 . Main engine (including welding part) 4 . Feeding device 5 . Hydraulic system 6 . Cooling system. The equipment has reasonable structure, easy to control and beautiful appearance.
Finished products are as follow:
Service Commitment & Quality Assurance:
Installation: If necessary, engineer is available to service machinery overseas; but all the relevant cost and extra 100USD/day for our engineer will be paid by the buyer.
Warranty: 1 year since the machine leave seller's factory.
During the warranty period, it covers all spare parts of machines, if you find some spare parts were damaged, those new spare parts will be supplied free by us, but normal wear and tear excepted. And the freight should be bore equally by both parties.
Product Tags:
|
|
Automatic Steel Bar Roof Truss Machinery Lattice Welding 12 M Every Min Images
|
